 |
|
|
(10)
Made of hard drawn aluminum, light weight. Useful when mounting resonant lines, elements for beams, etc. Strong durable rust-proof.
|
|
|
|
|
|
|
|
|
|
|
(14)
Light and tough these nylon cable clamps are used as a clamp, strain relief, strap hanger, fastener or strap. Smooth non-abrasive surfaces, rounded edges will not cause shorts or grounds in cable. Insoluble in solvents, gasoline, gas, hydraulic fluids, alcohol, acids, alkalies. Snaps on cable. Fungus resistant. Natural Color. Temperature Range: -60°F to +450°F.
|
|
|
|
|
|
|
|
|
|
|
|
(16)
Recommended for general use indoors or outdoors. They are economical, light weight and chemically resistant. They have excellent shock resistant properties in temperatures from -40ºF to 185ºF. Stock colors: Natural amber, clear.
|
|
|
|
|
|
|
|
|
|
|
(13)
Hold and insulate electrical and electronic components, accessories — spare parts. Holds firmly and still permits fast and easy insertion. Convenient for fastening clips and retainers for transistors, batteries, fuses, capacitors, resistors, lamps, etc. Operating Temperature: -20° to 165° F. Material: Rigid Vinyl
|
|
|
|
|
|
|
|
|
|
|
Holds cable wire tubing pipe panels many and varied uses. Made of Nylon, they are insulating, non corrosive and weather resistant. Easily fastened easily removed. Strong and elastic.
|
|
|
|
|
|
|
|
|
|
|
(13)
These plastic clips are insulating, strong and elastic. They have many uses, such as keeping telephone wires off the floor, holding wire, cable, tubing rods, etc. in position. Temperature Range: -10°F to 175°F. Color: Gray.
|
|
|
|
|
|
|
|
|
|
|
(4)
Daburn's "over-the-top Stik Klip" is a fast and convenient self adhesive clip. Simply remove the protective paper backing of the adhesive tape and press into place. The unique configuration of the Stik-Klip allows for channeling of wire or tubing bundles up to 1/2" in diameter. Temperature Range: -30°F to +170°F. Stock color: Black.
|
|
|
|
|
|
|
|
|
|
|
Push button wire ties for harnessing wire. 5" in length, each tie is adjustable to 16 different diameters. Made of strong polyethylene, it is inert chemically and heat resistant. Breaking strength 45 to 95 lbs. After the tie is placed in hole for anchoring, wires can be replaced or added by loosening tie and pulling tight again.
|
|
|
|
|
|
|
|
|
|
|
Useful for temporary or permanent installation. Can be adapted for immediate bundling or harnessing. Plastic insulated. Has .016" steel gauge, 5/32" wide, 30 lb. test.
|
|
|
|
|
|
|
|
|
|
|
(10)
Nylon fiber flat braided impregnated with MW microcrystaline fungicidal wax. Stays flat. Designed to create a wider contact to distribute the stress. Flexible. Won't slip when knotted. Resistant to fungus, flame, abrasion, acids. MIL-T-43435 (new) supersedes MIL-T-713 (old). Meets Mil-T-43435 & Mil-T-713 & A-A-52080.
|
|
|
|
|
|
|
|
|
|
|
(8)
Dacron fiber, flat braided, impregnated with non-slip fungicidal finish. Will not cut or damage insulation. Stays flat. Has all characteristics of nylon with less elongation, better resistance to acids. Mil-T-43436 Type II Finish B. 40% maximum elongation. 350°F. Meets AA-52081B.
|
|
|
|
|
|
|
|
|
|
|
(3)
Teflon coated fiberglass flat braided lacing tape bonded for high temp, operations (800ºF) Stays flat — for strength, stability. Teflon finish increases strength and abrasion resistant surface. Will not cut or damage insulation.
|
|
|
|
|
|
|
|
|
|
|
|
(2)
For high temperature operations (-100°F to 450°F). Type III Fin. A. Color: Brown.
|
|
|
|
|
|
|
|
|
|
|
(8)
The nylon cords are manufactured to meet MIL-T-713D Type P specification, Composition P, Classes 3, 2,1. Wax finish — compounded with fungicide to resist mildew. Easy to tie. 20% maximum elongation. Packaged in 1 lb. tubes. Available in natural and black (B).
|
|
|
|
|
|
|
|
|
|
|
|
(18)
The linen cords are manufactured from pure flax treated with microcrystaline wax compounded with fungicide to resist mildew. Classes 1, 2, 3 meet MIL-T-713 Type N specifications.
|
|
|
|
|
|
|
|
|
|
|
(5)
DAFLEX ST250 cold shrinking Stretch-N-Seal™ tape requires no heat to provide a secure covering where the size and or shape of an object does not permit the use of shrinkable tubing. It seals against liquids, gases and mosst chemicals; insulates and water proofs. Provides over 1 KV per mil. It seals to itself. Color Black. Simply remove 2" to 3" of tape from the roll, stretch it to 3 times its supplied width and wrap it spirally around the object, with a 50% overlap.
|
|
|
|
|
|
|
|
|
|
|
(26)
Available in four formulations: Polyethylene, Rulan (flame retardant polyethylene), Nylon and Teflon. Easily applied. Twists on easily. Can be flexed repeatedly without cracking or breaking. Reusable, bends around sharp corners. Expandable. Per MIL-P-22692, Mil-P-17091, Mil-20693.
|
|
|
|
|
|
|
|
|
|
|
(24)
With only six sizes you can finish and protect regularly and irregularly shaped openings from causing abrasion and cut-through damage tc wires, cables, etc. Just cut the continuous grommet to your desired circumferential length and slip it on to the edge of the hole. It stays in place securely. Available in natural polyethylene solid (DPG), natural polyethylene serrated (DPGS), natural nylon solid (DNG) and natural nylon serated (DNGS).
|
|
|
|
|
|
|
|
|
|
|
(2)
These nylon screw mounted Hold Downs will accommodate 18, 30 and 50 (or LB) ties, fed from any of four directions. They fasten with #6 flat head screws. One inch square or 3/4 inch square. May also fasten without screw using double sided tape supplied.
|
|
|
|
|
|
|
|
|
|
|
This long lasting, one piece plastic hinge attaches easily with screw, staple or rivet. It works silently without lubrication and resists acid and corrosion.
|
|
|
|
|
|
|
|
|
|
|
(8)
Slotted machine screw with rounded head.
|
