|
|
|
Voltage Range (Vdc)
|
|
- 4.5 Min., 5 Typ., 12 Max., 5 Vin (nom)
- 9 Min., 12 Typ., 18 Max., 12 Vin (nom)
- 18 Min., 24 Typ., 36 Max., 24 Vin (nom)
- 36 Min., 48 Typ., 75 Max., 28 Vin (nom)
|
|
Start Up Voltage (Vdc)
|
|
- 4.5 Max., 5 Vin (nom)
- 9 Max., 12 Vin (nom)
- 18 Max., 24 Vin (nom)
- 36 Max., 28 Vin (nom)
|
|
Shutdown Voltage (Vdc)
|
|
- 2 Min., 3 Typ., 4 Max., 5 Vin (nom)
- 6 Min., 7 Typ., 8 Max., 12 Vin (nom)
- 13 Min., 15 Typ., 17 Max., 24 Vin (nom)
- 29 Min., 32 Typ., 35 Max., 28 Vin (nom)
|
|
Start Up Time (ms)
|
|
10 Typ., 20 Max., Constant resistive load, Power up, Remote ON/OFF
|
|
Input Surge Voltage (Vdc)
|
|
- 15 Max., 5 Vin (nom)
- 25 Max., 12 Vin (nom)
- 50 Max., 24 Vin (nom)
- 100 Max., 28 Vin (nom)
|
|
Input Filter
|
|
Capacitor Type
|
|
Remote ON/OFF (mA)
|
|
- Open or high impedance: Referred to -Vin pin and Ctrl pin, DC-DC ON
- 2 Min., 3 Typ., 4 Max., Applied current, DC-DC OFF
- 2.5 Typ., Remote OFF input current
|
|
|
|
|
Minimum Voltage Accuracy
|
|
-1 %
|
|
Maximum Voltage Accuracy
|
|
1 %
|
|
Minimum Line Regulation1
|
|
-0.2 %
|
|
Maximum Line Regulation2
|
|
0.2 %
|
|
Load Regulation (%)
|
|
- -1 Min., 1 Max., No load to full load, Single
- -1 Min., 1 Max., Dual
- -0.5 Min., 0.5 Max., 10% load to 90% load, Single
- -0.8 Min., 0.8 Max., Dual
|
|
Minimum Cross Regulation3
|
|
-5 %
|
|
Maximum Cross Regulation4
|
|
5 %
|
|
Ripple and Noise (mVp-p)5
|
|
- 50 Typ., 5 Vout
- 50 Typ., 9 Vout
- 50 Typ., 12 Vout
- 50 Typ., 15 Vout
- 75 Typ., 24 Vout
- 75 Typ., ±12 Vout
- 75 Typ., ±15 Vout
|
|
Typical Transient Response Recovery Time6
|
|
500 µs
|
|
Over Voltage Protection (Vdc)
|
|
- 6 Min., 8 Max., 5 Vout
- 10 Min., 14 Max., 9 Vout
- 13 Min., 19 Max., 12 Vout
- 16 Min., 22 Max., 15 Vout
- 25 Min., 35 Max., 24 Vout
|
|
Short Circuit Protection
|
|
Continuous Automatic Recovery
|
|
1 Minimum Line Regulation
2 Minimum Line Regulation
3 Asymmetrical load 25%/100% FL, Dual
4 Asymmetrical load 25%/100% FL, Dual
5 Measured by 20MHz bandwidth
6 25% load step change
|
|
|
|
|
General Specifications
|
|
- Isolation Voltage, Vac:
- 1 minute, reinforced insulation for 250 Vac working voltage, 5000 Min.
- Isolation capacitance, pF: 16 Typ., 20 Max.
- Leakage current, µA: 240 Vac, 60 Hz, 2 Max.
- Switching frequency, kHz: 100 Min.
- Clearance/creepage, mm: 8 Min.
|
|
Environmental Specifications
|
|
- Operating ambient temperature, ºC
- With derating: -40 Min.+105 Max.
- Maximum case temperature, ºC: +105 Max.
- Storage temperature range, ºC: -55 Min., +125 Max.
- Thermal shock: MIL-STD-810-F
- Shock: MIL-STD-810-F
- Vibration: MIL-STD-810-F
- Relative Humidity: 5% to 95% RH
- Load-free reflow solder process: SMD type only: IPC J-STD-020E
- Moisture sensitivity level (MSL): SMD type only: IPC J-STD-033C, Level 2
|
|
Physical Specifications
|
|
- Design Meet Safety Standard: EN/IEC/ANSI/AAMI ES60601-1, UL:E360199, EN/IEC/UL 60950-1, 62368-1, UL:E193009, CB:UL (Demko)
- Case Material: Non-conductive black plastic
- Base Material: Non-conductive black plastic
- Potting Material: Silicone, (UL94 V-0)
- Dimensions:
- 0.95" x 0.57" x 0.40" (24.3 x 14.4 x 10.2 mm), SMD Type
- 0.95" x 0.57" x 0.41" (24.3 x 14.4 x 10.5 mm), DIP Type
- Weight: 7g (0.24oz)
- MTBF: 6.809 x 106 hrs, MIL-HDBK-217F, Full load
|
|
EMC Specifications
|
|
- EMI: EN55011, EN55032 and FCC Part 18, With external components, Class A, Class B
- ESD: EN61000-4-2, Air ±15KV and Contact ±8KV, Perf. Criteria A
- Radiated immunity: EN61000-4-3, 10V/m, Perf. Criteria A
- Fast Transient: EN61000-4-4, ±2KV, Perf. Criteria A
- Surge: EN61000-4-5, ±1KV, Perf. Criteria A
- Conducted Immunity: EN61000-4-6, 10 Vr.m.s, Perf. Criteria A
- Power Frequency Magnetic Field: EN61000-4-8, 100 A/m continuous; 1000 A/m 1 second, Perf. Criteria A
|
|
|
|
|
- 5000Vac Input to Output 2MOPP Isolation
- Low Leakage Current
- High Efficiency
- Over Voltage, Short Circuit and Under Voltage Protection
- No Minimum Load Required
- Miniature DIP16 Package (0.95" x 0.57" x 0.41")
- Miniature SMD16 Package (0.95" x 0.57" x 0.40")
- IEC 60601-1 Medical safety approval
|
|
|
|
All specifications are typical at 230Vac input, full load and 25ºC, unless otherwise noted.
For further information, please contact Polytron Devices.
|
|
|
|